|
|
| 380D Digital to Analog Converter | B.A.T |
|
|
|
|
|
|
|
|
|
ESS Technology SABRE32 Ultra DAC / Digital Filter (ES9016) working in 32-bit Hyperstream™ to achieve
unprecedented jitter immunity and low-level linearity via a patented Time Domain Jitter Eliminator
True 32-bit asynchronous Digital-to-Analog converter
Digital Audio Signal Processing with M-AJiC32 (MOON Asynchronous Jitter Control in 32-bit mode)
Our own "Dual Jitter Control System" producing a virtually jitter-free digital signal below 1 picosecond
for ultra-low distortion, and ensuring compatability with virtually any connected digital device
Eight (8) digital inputs (AES/EBU x 2, S/PDIF x 3, TosLink x 2 and USB x 1) allowing for a
connection to virtually any digital source, along with one (1) S/PDIF digital output
Optional MiND (MOON intelligent Network Device) module (the 9th input) via WiFi
or Ethernet input for multi-room streaming
Optional variable analog outputs (balanced & single-ended) using M-eVOL volume circuit, originally
in 1.0dB increments. M-eVOL is based on a resistive array configuration with no sonic degradation
of the audio signal at all volume settings
Full digital monitor loop on S/PDIF to accommodate external devices such as a room
correction component or digital recorder
Highly advanced separate digital and analog power supplies, each using a toroidal transformer
and 11 stages of voltage regulation
USB input with galvanic isolation which eleminates all ground current (i.e. no electrical connection)
between the USB device (computer, music server, etc.) and the 380D, preserving the accuracy of
the audio signal
The entire analog stage is a fully balanced differential circuit for increased dynamic range and
headroom,higher resolution, as well as improved signal-to-noise ratio
Advanced analog signal path using a DC servo circuit and proprietary 18dB/octave analog filter
12 Volt trigger output for remote operations
RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
IR input for external control
SimLink™ controller port for 2-way communications with other compatible MOON components
4-Layer printed circuit boards with pure copper tracings for a much shorter signal path;
This results in greater sonic accuracy and a dramatically improved signal-to-noise ratio
Rigid chassis construction to minimize the effects of external vibrations
Optimized selection of very high quality electronic components in a symmetrical circuit design
Includes CRM-2 remote control
|
|
|
